• cqtechasol
  

  • Registrat/da: 22 / Des / 2009
  • Darrera visita: 04 / Oct / 2011
  • Enviaments: 40

  Enviat: 22/Jun/2010 - 15:34

  Bon dia;
  Em trobo davant d'un AHTEC model TUC0 (o això diu, tot i q no apareix ni al google)
  Que desprès d'una inst. de Linkat 3.0 no em reconeix cap de les dues targes de net.
  Here's some info:
  
  hwinfo --netcard
  25: PCI 200.0: 0200 Ethernet controller
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_1969_1063
  Unique ID: B35A.TVMdBKLkIE8
  Parent ID: z8Q3.6XhEowSpRr2
  SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Attansic Ethernet controller"
  Vendor: pci 0x1969 "Attansic Technology Corp."
  Device: pci 0x1063
  SubVendor: pci 0x14c0 "COMPAL Electronics Inc"
  SubDevice: pci 0x0046
  Revision: 0xc0
  Memory Range: 0xf0500000-0xf053ffff (rw,non-prefetchable)
  I/O Ports: 0x2000-0x2fff (rw)
  IRQ: 5 (no events)
  Module Alias: "pci:v00001969d00001063sv000014C0sd00000046bc02sc00i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)
  
  26: PCI 800.0: 0280 Network controller
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_83
  Unique ID: GBI1.yqp+VxAVQ9C
  Parent ID: qTvu.8Makl3iDVc3
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:08:00.0
  SysFS BusID: 0000:08:00.0
  Hardware Class: network
  Model: "Intel Network controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x0083
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x1205
  Memory Range: 0xf0600000-0xf0601fff (rw,non-prefetchable)
  IRQ: 11 (no events)
  Module Alias: "pci:v00008086d00000083sv00008086sd00001205bc02sc80i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #16 (PCI bridge)
  
  
  # lspci -vnn
  02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Device [1969:1063] (rev c0)
  Subsystem: COMPAL Electronics Inc Device [14c0:0046]
  Flags: bus master, fast devsel, latency 0, IRQ 5
  Memory at f0500000 (64-bit, non-prefetchable) [size=256K]
  I/O ports at 2000 [size=128]
  Capabilities: [40] Power Management version 3
  Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
  Capabilities: [58] Express Endpoint, MSI 00
  Capabilities: [6c] Vital Product Data <?>
  Capabilities: [100] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
  CESta: RxErr- BadTLP+ BadDLLP+ Rollover- Timeout- NonFatalErr-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
  Capabilities: [180] Device Serial Number ff-22-26-00-37-ed-51-ff
  
  08:00.0 Network controller [0280]: Intel Corporation Device [8086:0083]
  Subsystem: Intel Corporation Device [8086:1205]
  Flags: bus master, fast devsel, latency 0, IRQ 11
  Memory at f0600000 (64-bit, non-prefetchable) [size=8K]
  Capabilities: [c8] Power Management version 3
  Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
  Capabilities: [e0] Express Endpoint, MSI 00
  Capabilities: [100] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
  UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
  CESta: RxErr+ BadTLP+ BadDLLP- Rollover- Timeout+ NonFatalErr+
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
  Capabilities: [140] Device Serial Number 30-77-82-ff-ff-64-1e-00
  
  #ifconfig -a
  lo Link encap:Local Loopback
  inet addr:127.0.0.1 Mask:255.0.0.0
  inet6 addr: ::1/128 Scope:Host
  UP LOOPBACK RUNNING MTU:16436 Metric:1
  RX packets:366 errors:0 dropped:0 overruns:0 frame:0
  TX packets:366 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:29016 (28.3 Kb) TX bytes:29016 (28.3 Kb)
  
  pan0 Link encap:Ethernet HWaddr 96:AD:B7:18:3B:27
  BROADCAST MULTICAST MTU:1500 Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
  
  kernel i paquets by default a model client (es del cd de la inst.)
  Per ón començar?
  Gràcies
  
  cQTechAdminSolutions

  • 
  •  
• jgraci25
  
  

  • Rang:
  • Registrat/da: 04 / Maig / 2024
  • Darrera visita: 18 / Mar / 2024
  • Enviaments: 2390

  Enviat: 22/Jun/2010 - 17:59

  Hola,
  
  Primer et diria que instal·lessis el paquet kernel-pae-extra (executant la comanda uname -a sabràs el tipus de nucli que tens (pae, default, etc).
  
  A partir d'aquí mira a veure si et reconeix alguna de les dues ethernets.
  
  Si veus que tot i haver instal·lat aquest paquet alguna de les ethernets NO és detectada, pots fer servir aquest repositori:
  
  http://download-linkat.xtec.cat/distribution/linkat-3.0/repomirror/kernel-next/
  
  i instal·lar el nou kernel (2.6.32).
  
  En ser una revisió del kernel més nova, segurament els drivers que necessites estaran ja inclosos.
  
  A veure si hi ha sort.
  
  
  Joan

  • 
  •  
•  
•  

Usuaris connectats

• 0 usuaris

Aquesta llista mostra els usuaris actius durant els darrers 20 minuts.