Bon dia;
Em trobo davant d'un AHTEC model TUC0 (o això diu, tot i q no apareix ni al google)
Que desprès d'una inst. de Linkat 3.0 no em reconeix cap de les dues targes de net.
Here's some info:

hwinfo --netcard
25: PCI 200.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1969_1063
Unique ID: B35A.TVMdBKLkIE8
Parent ID: z8Q3.6XhEowSpRr2
SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Attansic Ethernet controller"
Vendor: pci 0x1969 "Attansic Technology Corp."
Device: pci 0x1063
SubVendor: pci 0x14c0 "COMPAL Electronics Inc"
SubDevice: pci 0x0046
Revision: 0xc0
Memory Range: 0xf0500000-0xf053ffff (rw,non-prefetchable)
I/O Ports: 0x2000-0x2fff (rw)
IRQ: 5 (no events)
Module Alias: "pci:v00001969d00001063sv000014C0sd00000046bc02sc00i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

26: PCI 800.0: 0280 Network controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_83
Unique ID: GBI1.yqp+VxAVQ9C
Parent ID: qTvu.8Makl3iDVc3
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:08:00.0
SysFS BusID: 0000:08:00.0
Hardware Class: network
Model: "Intel Network controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0083
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x1205
Memory Range: 0xf0600000-0xf0601fff (rw,non-prefetchable)
IRQ: 11 (no events)
Module Alias: "pci:v00008086d00000083sv00008086sd00001205bc02sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)


# lspci -vnn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Device [1969:1063] (rev c0)
Subsystem: COMPAL Electronics Inc Device [14c0:0046]
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at f0500000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 2000 [size=128]
Capabilities: [40] Power Management version 3
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [6c] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP+ BadDLLP+ Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [180] Device Serial Number ff-22-26-00-37-ed-51-ff

08:00.0 Network controller [0280]: Intel Corporation Device [8086:0083]
Subsystem: Intel Corporation Device [8086:1205]
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f0600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr+ BadTLP+ BadDLLP- Rollover- Timeout+ NonFatalErr+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number 30-77-82-ff-ff-64-1e-00

#ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:366 errors:0 dropped:0 overruns:0 frame:0
TX packets:366 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:29016 (28.3 Kb) TX bytes:29016 (28.3 Kb)

pan0 Link encap:Ethernet HWaddr 96:AD:B7:18:3B:27
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

kernel i paquets by default a model client (es del cd de la inst.)
Per ón començar?
Gràcies

cQTechAdminSolutions

Hola,

Primer et diria que instal·lessis el paquet kernel-pae-extra (executant la comanda uname -a sabràs el tipus de nucli que tens (pae, default, etc).

A partir d'aquí mira a veure si et reconeix alguna de les dues ethernets.

Si veus que tot i haver instal·lat aquest paquet alguna de les ethernets NO és detectada, pots fer servir aquest repositori:

http://download-linkat.xtec.cat/distribution/linkat-3.0/repomirror/kernel-next/

i instal·lar el nou kernel (2.6.32).

En ser una revisió del kernel més nova, segurament els drivers que necessites estaran ja inclosos.

A veure si hi ha sort.


Joan