Compal JFT00 12" i wifi

Hola,
He instal·lat la Likat 3 beta 2 a un compal JFT00.
Tinc un problema amb activar el sensefils. La tarja la detecta sense problemes, però no la puc habilitar. Crec que em falten els pilots per poder habilitar el perifèric. Ni utilitzant la tecla funció+F2 i amb el butó d'activació s'activa!!!
Es pot forçar l'activació d'alguna altre manera?
he fet:
ifconfig wlan0 up
però res...
fins @r@
enric
Hola Enric,

Recorda d'instal·lar el paquet kernel-default-extra (o kernel-pae-extra) segons el teu nucli. Així s'instal·laran els drivers que et falten per fer funcionar la wifi.


Joan
Hola Joan,
Sisi, ja l'havia instal·lat...
sense èxit :-(
fins @r@
enric
Hola Enric,

Pots posar la sortida de la comanda:

/sbin/lspci

És que si la wifi és broadcom, aquesta es configura d'una forma diferent.



Joan
Hola Joan,

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 04)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04)
01:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12)

Fins @r@
enric
Hola,
Us passo més informació per anar descartant possibilitats:
he instal·lat els drivers iwl5000-ucode i kernel-pae-extra
si faig un /sbin/lspci:
01:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
si faig un ifconfig -a:

eth0 Link encap:Ethernet HWaddr 00:21:70:F6:28:4A
inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::221:70ff:fef6:284a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:131 errors:0 dropped:0 overruns:0 frame:0
TX packets:153 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:94590 (92.3 Kb) TX bytes:22264 (21.7 Kb)
Interrupt:17

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:340 (340.0 b) TX bytes:340 (340.0 b)

pan0 Link encap:Ethernet HWaddr 52:D8:CD:BC:F3:2F
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

wlan0 Link encap:Ethernet HWaddr 00:21:6B:10:8B:86
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

wmaster0 Link encap:UNSPEC HWaddr 00-21-6B-10-8B-86-00-00-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Si utilitzo l'ifup enlloc del networkmanager no em troba xarxes sensefils per autenticar-me
fent un iwlist wlan0 scan, no troba res.
i fent un ifconfig wlan0 up, sembla que l'activa, però continua deshabilitada...
El mateix butó que serveix per habilitar el wifi serveix per el bluetooth.
fins @r@
enric